Electrical Continuing Education Courses in Texas: How to Compare Them
Electrical continuing education courses in Texas all promise the same 4 hours, but they are not built the same. Some cover only code, some sell the hours one at a time, and some never say how completions reach TDLR. This guide shows how to compare courses side by side: the provider and course numbers, the topics, the format, the total price, the certificate and the reporting. Every rule below comes from TDLR’s own pages, linked throughout.
Get the $20 CE Course Visit TX Electrician CE
Quick Answer: Most Texas electrician licensees must complete 4 hours of TDLR-approved electrical continuing education courses before each renewal. The courses must come from a registered TDLR provider, be taken within the term of the license being renewed, and cover the National Electrical Code, Texas electrician law, the TDLR administrative rules and NFPA 70E electrical safety. Four hours of NEC only is not enough. Our Course #32560 covers the full 4 hours online for $20.
What Every Texas Course Has to Include
TDLR sets one standard for every course: 4 hours from a registered TDLR provider that cover the National Electrical Code, Texas electrician law, the TDLR rules and NFPA 70E safety. Who needs the hours, the topic list and the deadlines are covered in our guide to Texas electrical continuing education. The rest of this page is about telling courses apart.
Choosing a Registered TDLR Provider
The single most important check before buying electrical continuing education courses is the provider. TDLR is clear: courses must be from a registered TDLR provider, and unapproved courses will not count toward the hours required for renewal.
1. Look for the provider and course numbers
A registered provider should publish both. Ours are Provider #2512 and Course #32560.
To confirm a provider’s approval on TDLR’s own site, see how to check a TDLR approved course.
2. Confirm the course covers all four subject areas
NEC, Texas law, the administrative rules and NFPA 70E. A course that lists only code updates may leave the licensee short.
3. Check how the certificate is delivered
TDLR says that if a certificate has not arrived within 15 days from the end of the course, the licensee should check with the provider first. A course that issues the certificate right away avoids that wait entirely.
4. Remember who reports the hours
TDLR makes reporting the provider’s responsibility. Choosing a provider that is set up to report is part of choosing the course.
5. Compare the total price for 4 hours
Price the full requirement, not one module.
Red Flags to Watch For
- No provider number on the course page or checkout
- Code-only course outlines that never mention Texas law, the rules or NFPA 70E
- Hours sold one at a time with no clear total for the full 4 hours
- No word on certificates or how completions reach TDLR
The NEC-Only Rule
This is the trap that catches experienced electricians. Many electrical continuing education courses focus on National Electrical Code changes, and code is a required subject. But TDLR says that if a licensee has already taken four hours of continuing education in the NEC only, the licensee will be required to take an additional approved course in the law, rules or safety from NFPA 70E, which will be a minimum of one hour.
In practice, that means four hours of code alone can turn into five or more hours and a second purchase. The safest choice is one of the electrical continuing education courses that covers code, Texas law, the TDLR rules and NFPA 70E safety inside the same 4 hours.
A Simple Example
Picture a journeyman who takes a popular 4-hour code update class at a supply house. The class was approved and the hours were reported, but every hour was NEC. At renewal, that journeyman still owes an additional approved course of at least one hour in law, rules or NFPA 70E safety. A course that covers all four subject areas from the start avoids the extra step.

Two Rules to Check on Any Course Page
TDLR gives no credit for taking the same course twice and no credit for a partly finished course, so check the course number against last year’s certificate before buying. A course that saves progress lets you stop and pick up later without losing hours.
Electrical Continuing Education Courses Compared
| Course type | Covers all four subjects | Schedule | Main risk |
|---|---|---|---|
| Complete 4-hour online course | Yes, when built for Texas | Any hour, self-paced | Choosing an unregistered provider |
| NEC-only code update class | No | Varies | Extra law, rules or safety hour required |
| Separate single-topic classes | Only if combined | Varies | More checkouts and certificates to track |
| Classroom seminar | Depends on the agenda | Fixed date | Lost work time and travel |
For most working electricians, the complete online option is the easiest of the electrical continuing education courses to fit around job sites and service calls. One enrollment covers the full requirement, and there is no NEC-only surprise at renewal. Our page on Texas electrical CE online goes deeper on the online format.
Why Online Works for Electricians
Electricians rarely work a desk schedule. Shifts change, service calls run late and job sites move. Online electrical continuing education courses let a licensee finish a lesson on a lunch break, stop when a call comes in and pick up later from a phone, tablet or laptop. The rules are the same as any other format: the provider must be registered with TDLR, the course must cover the required subject areas, and the hours must fall inside the license term. When those boxes are checked, an online course earns the same credit as a classroom seminar without the drive, the parking or the lost day of work. For a crew lead or a shop owner, that also means a whole team can finish on their own time instead of scheduling everyone into one classroom date.
How to Read a Course Page
When comparing electrical continuing education courses, look for five things on the course page: the provider number, the course number, a list of the topics covered, the total hours and the total price. If any of those are missing, ask the provider before paying. A legitimate Texas provider should be able to answer each one quickly, because TDLR requires approved courses from registered providers and the licensee carries the risk if a course does not count.
Our 4-Hour Online Course: Course #32560
The TX Electrician CE renewal course from txelectriciance.com is TDLR Provider #2512, Course #32560. It covers the 4 hours a Texas electrician needs at renewal in one online enrollment.
- All 4 hours in one course, so no required topic is missed
- Any device, any hour: finish on a phone during a break or on a laptop at home
- Instant certificate when the course is complete
- Price: Sale $20, regularly $35
Finish in Three Steps
Step 1: Enroll
Check out once for the full 4-hour course.
Step 2: Complete the lessons
Work at your own pace and pick up where you left off.
Step 3: Save the certificate and renew
Keep the certificate for one year, confirm the hours on TDLR’s look up, and renew online.
Who This Course Fits Best
- Journeymen and masters who want the full 4 hours in one place
- Maintenance electricians and residential wiremen working shifts or service calls
- Apprentices who are not enrolled in a registered training course
- Multiple license holders who need one set of 4 hours inside the renewal period
After the Course
Keep the certificate for one year and confirm the hours on TDLR’s Continuing Education Courses Look Up before you renew. Our guide to checking that a course is TDLR approved covers reporting and what to do if hours do not show up.
Frequently Asked Questions
What should I compare between electrical continuing education courses?
Check the TDLR provider and course numbers, that all four required topics are covered, that the full 4 hours are in one price, how the certificate is delivered and how fast the provider reports hours to TDLR.
Do online electrical continuing education courses count in Texas?
Yes, when the course comes from a registered TDLR provider. Our course is TDLR Provider #2512, Course #32560.
Is 4 hours of NEC enough?
No. TDLR says a licensee who took four hours of NEC only must take an additional approved course of at least one hour in the law, rules or NFPA 70E safety.
Can I repeat the course I took last time?
No. TDLR does not give credit for attending the same course more than once.
How long do I keep my certificate?
TDLR requires licensees to keep the certificate of completion for one year after the date of completion.
Do apprentices need CE?
Yes, unless they are enrolled in a department-registered electrical apprenticeship training course. Otherwise TDLR requires four hours of continuing education for renewal.
What happens if I do not finish the course?
TDLR does not accept partial completion. However, a provider may allow the licensee to finish the course at another time.
Do electrical contractors need CE?
No. TDLR says contractors and residential appliance installers are not required to complete continuing education.
Renew With One Complete 4-Hour Course
Skip the NEC-only trap and the extra checkouts. Get the full 4 hours in one of the simplest electrical continuing education courses in Texas from TDLR Provider #2512, work on any device and download the certificate instantly.

