TDLR Continuing Education for Electricians: How to Check a Course Is Approved
TDLR continuing education for electricians only counts if TDLR approved both the provider and the course. Plenty of sites sell “electrical CE,” but TDLR only accepts hours from a registered provider teaching an approved course, and the provider is the one who reports your hours. This guide shows how to check a provider and course on TDLR’s own site, how completed hours get to TDLR, and how to confirm they posted.
Enroll for $20 Browse CE Courses
Quick Answer: TDLR continuing education for electricians must come from a TDLR-registered provider teaching a department-approved course that covers the NEC, NFPA 70E safety and Texas electrician law and rules. The provider, not the electrician, reports the hours to TDLR. Electricians keep the completion certificate for one year and can confirm hours with TDLR’s Continuing Education Courses Look Up.
What TDLR Approves
TDLR registers each provider and approves each course before it is offered. An approved electrician course covers 4 hours of the NEC, Texas electrician law, the TDLR rules and NFPA 70E; the full rule set is in our guide to Texas electrical continuing education.
Why “TDLR Approved” Is the Only Label That Counts
TDLR is direct about this: courses must be from a registered TDLR provider, and unapproved courses do not count toward the required hours. That rule catches electricians in a few common ways:
- Out-of-state approvals. A course approved in Oklahoma, Louisiana or another state is not automatically approved in Texas.
- National CEU sites. A site may sell “electrical CEUs” that are valid elsewhere. TDLR measures CE in approved hours, not generic units. (The electrical CEU guide covers that difference.)
- Manufacturer or employer training. Product training can be useful on the job, but it only counts if it is an approved course from a registered TDLR provider.
- Code-only classes. A code update class can be approved and still leave the requirement unfinished. TDLR says an electrician who took four hours of NEC-only coursework must take at least one more approved hour in law, rules or NFPA 70E.
How Providers Get TDLR Approval
Understanding the provider side makes it easier to judge a course. Under TDLR’s provider rules:
- The provider registers with TDLR. A business must apply to become an approved continuing education provider.
- Each course is approved before it is offered. The provider submits a course approval application, a timed topic outline, the course material and the course approval fee before scheduling the course.
- Registration is yearly. Each year the provider must renew its registration to keep offering courses.
- Course approvals last one year. A course approval is valid for one year, as long as the provider’s own approval stays current.
That means TDLR approval is not a one-time stamp, and TDLR continuing education for electricians is only valid while both the provider and the course approval are current. A legitimate provider can show a current provider number and an approved course number.
How to Verify a Provider Is TDLR Approved
Before paying for TDLR continuing education for electricians, an electrician can take three quick steps:
1. Ask for the provider number and course number
An approved provider should list both. TX Electrician CE, for example, is Provider #2512, and its 4-hour course is Course #32560.
2. Search TDLR’s License Search
TDLR’s online License Search includes “Continuing Education Providers” as a license type, so a provider’s active status can be checked by name or number.
3. Check the course content
Confirm the course covers all required areas (NEC, NFPA 70E, Texas law and rules) and adds up to a full 4 hours. Anything shorter means buying a second course.
If any of those answers are unclear, it is safer to pick a different provider than to find out later that the hours did not count.
Once you know a course is approved, our guide to electrical continuing education courses shows how to compare price, format and certificate timing.

Red Flags When Shopping for TDLR Continuing Education for Electricians
Most providers are legitimate, but a few warning signs suggest a course may not count as TDLR continuing education for electricians:
No provider number on the site. A registered provider has a TDLR provider number and should display it. If it is missing, ask before buying.
No course number. Every approved course has its own approval. A provider number alone does not prove the specific course is approved.
Less than 4 hours. TDLR requires four hours, and one hour equals 50 minutes of instruction. A shorter course leaves the electrician short.
Code only. If the course covers only the NEC, it will not satisfy the law, rules and NFPA 70E part of the requirement.
“We’ll email you a certificate, you report it.” TDLR puts reporting on the provider. A provider that expects the electrician to report hours is not following the TDLR process.
Multi-state bundles with vague Texas language. A course built for several states should still name its Texas provider and course numbers.
When in doubt, compare the course against TDLR’s own electrician continuing education page, which lists the subject areas and reporting rules every approved course must follow.
How TDLR Continuing Education Hours Get Reported
With TDLR continuing education for electricians, the electrician does not upload hours. TDLR states that reporting continuing education hours is the responsibility of the continuing education provider. The usual sequence:
- The electrician finishes the full approved course. No partial credit is allowed.
- The provider issues a course completion certificate.
- The provider reports the completed hours to TDLR.
- The hours appear on TDLR’s Continuing Education Courses Look Up, where the licensee can check them.
TX Electrician CE reports completions to TDLR within 1 business day.
When Hours Do Not Show Up
TDLR gives a clear order of steps if hours are missing:
- If a completion certificate has not arrived within 15 days of finishing the course, check with the provider first.
- If the hours still have not been reported, contact the provider again to make sure they are reported.
- If the reporting issue is not resolved, the licensee has the option of filing a complaint against the provider.
TDLR can also be reached at 512-463-6599 or 800-803-9202 (in state only).
What to Do With the CE Certificate
The completion certificate is the proof that TDLR continuing education for electricians was completed. TDLR requires licensees to keep a copy of the certificate for one year after the date of completion, and a TDLR inspector may ask to see it during an inspection or investigation.
A few practical habits help:
- Save the certificate as a PDF in email or cloud storage the day the course is finished.
- Keep a printed copy in the truck or office file if inspections are common on the job.
- Confirm the hours on the Continuing Education Courses Look Up before the license deadline.
Why Electricians Choose TX Electrician CE
TX Electrician CE checks every box TDLR cares about:
- TDLR-approved: Provider #2512, Course #32560
- All required areas: NEC, NFPA 70E, Texas electrician law and TDLR rules in one 4-hour course
- Reporting handled: completions reported to TDLR within 1 business day
- $20, online and self-paced: start on a phone at lunch, finish on a laptop at home
Frequently Asked Questions
No. TDLR only accepts hours from a registered TDLR provider teaching a department-approved course. Unapproved courses do not count.
Ask for the provider and course numbers, then search TDLR’s License Search under the “Continuing Education Providers” license type.
The provider. TDLR makes reporting the provider’s responsibility, not the electrician’s.
Through TDLR’s Continuing Education Courses Look Up, linked from the TDLR electrician continuing education page.
TDLR says to check with the provider first if the certificate has not arrived within 15 days of finishing the course. If the problem is not resolved, the licensee can file a complaint against the provider.
One year after the date of completion. A TDLR inspector may ask to see it.
Only if the same course is approved by TDLR and offered by a registered TDLR provider.
Yes. TX Electrician CE is TDLR Provider #2512, and its 4-hour online course is Course #32560, available for $20.
Get TDLR-Approved Hours Today
TDLR continuing education for electricians comes down to three checks: an approved provider, an approved 4-hour course that covers every required area, and hours reported to TDLR. TX Electrician CE handles all three in one $20 online course.

